Slabbing, Chainsaw Rack, Slab Encapsulation Project

June 21, 2019

I spent some time slabbing up the silver maple log that I picked up a few weeks ago, started knocking out a quick shop organization project – a quick rack for my chainsaws – and got started on an epoxy slab encapsulation project.

Meet the Makers
June 22, 1-7PM
http://www.vondriskawoodworks.com/meet-the-makers.html

Viewer Projects

Coat Rack by David

Here are some images of a coat rack I made from Walnut for the wife.

Parsons style entry table by Drew

This is my version of a parsons style entry table made from black walnut. Opposed to the table legs coming through the top I opted to add three stretchers to allow the top to float. The table was made with hand cut mortise and tenon joinery. Table top is secured with elongated holes through the three stretchers. It is 1’ wide and 6’ long. I spent a long time finding the desired boards for the top and found two that I was able to join at the sap wood to blend the seam. The table was finished with 4 coats of general finishes arm-r-seal semi-gloss #churchofarmrseal then hand rubbed with a scotch brite finishing pad and paste wax

https://www.instagram.com/dunlapwoodworks/

Toolcast by Tomy

The whole toolchest is made out of Reclaimed wood (Dunnage and skids parts) that I’ve gathered over the years. For the outside I used red oak. I was lucky enough to find this amazing figure in a few pieces of white oak dunnage, for the drawers. I used guitar strap buttons for the drawer pulls.
The whole case was build using dovetails. dividers, back and drawer bottoms from plywood.
I will be using this chest in my shop for storing template,projects hardware, and tools.

Roll Top Bandsaw Boxes by Drew

This design boasts a unique roll-top lid for the top compartment along with a little drawer below.

Comments

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You are currently replying to a comment.

Cancel your reply and create a new comment.