I spent the last week working on the Bandsaw mill. I had a lot of setbacks while working on the raise/lower mechanism but I have a new plan to make that function. I just started working on the blade guides and put a blade on the saw for the first time.
Enter the giveaway: https://www.mattcremona.com/giveaways/triton-router-giveaway
The vanity is walnut built on a frame attached to a French cleat to allow it to float. The backsplash is a lived edge slab of walnut with ebony bowtie inlays. The inlays are hand cut. It is finished with a spar varnish. The pedestal and sink are onyx backlit with LEDs
I had a pile of leftover pieces of fir 2x4s (all about 12 – 18 inches).
I just made a tapering jig, which I knew I wanted to use. So, I decided I needed a footstool.
Made this cutting board for my wife. I based the design on her piano for colour and look. keys are maple and walnut and Cherry for the rest. It was very tricky to get everything to line up properly.
A friend of mine is building a Lego-themed tree house for Make-A-Wish and asked if I’d make a small table as part of the furnishings. He wanted it to look like a 4 stud Lego with a lower shelf for displaying a Lego creation, painted blue, and possibly a built in light. I then decided to make a few of the Lego studs mechanical.
One Lego stud is spring loaded and functions as the light switch.
Another Lego studs unlocks the back panel – instant “secret” storage and access to change batteries.
Submit your viewer project: Email me pictures and a description of your project and I’ll feature your project on the show.