The Orion 930 Dual Depth Pinless Wood Moisture Meter Kit features the Orion 930 meter, designed for measurement of moisture content from the surface down to .25β(6.4mm) or .75β(19mm) deep inside wood or other material. The Orion 930 Dual Depth moisture meter features the versatility that is needed for flooring, quality control, woodworking, and inspection applications.
Comments
i like your channel
Great videos
This would be great. I’ve been using my Indian weather rock. Great videos.
Like your channel and the videos. Great work! Would be nice to win this moisture meter:)
Thanks Mat π
Would love to replace my cheap meter with a really nice one! Thanks for the chance.
Can I enter for the moisture meter with the below info?
Videos are great love the channel. Really liked the one with your dad
Great job
cool vids and moisture meterwould be cool to win cheers from a sawyer
I really enjoy your videos and the workmanship in your projects
Love the channel Matt, I need to win the meter cuz I just bought a sawmill and now I’m broke, so “PICK ME, PICK ME” LOL. Always a pleasure watching your channel, keep up the good work
Love your channel Matt. You are solely responsible for me now needing a moisture meter as I have a shop full of milled slabs now. Keep up the good work!
Hello Matt, love your videos. Your sawmill and trailer with the log loader are awesome. Keep the videos coming!
Thank you Matt and Wagner for this chance at a wonderful addition to anybodies shop. I enjoy your build videos and your approach to woodworking. Good luck to all that entered.
Matt,
I enjoy your videos. I watch them regularly. I really enjoy the band saw mill.
Thanks
Larry
Thanks for all of your videos. I’ve learned a lot over the years.
Love the videos!
Dear Matt,
I want to win please pick me lol. Fingers crossed,
Hope I win! Thanks for the chance!
Dear Matt,
Keep up the great work on the videos. I always look forward to your new vids, they inspire me and push me to consider new/better ways of expressing myself with wood, and encourage me to keep on sawin’ with my band-saw mill.
Thanks!
Bruce
I really need one… too many cracked table tops… Thanks for the great content!
Iβve been looking for one. It the are crazy expensive to get here in Australia. Itβs, very hit and miss how much moisture in the wood shops when you go to buy. As a broken miItaly vet with no patience at the best of the time I am kind of stuck between a rock and hard place. It would be a very handy, well used and absolutely appreciated should I be chosen.
If not, good luck to the guy or girl who gets their hands on it!
Keep up the good work. I love watching your show probably more than Marc.s….. shh donβt tell him π
Kind regards,
Ian Ryan
Do you still have the Gilligan hat my wife sent you when you were at Marc’s shop a couple of years ago.
I really enjoy watching the content that you produce.
I really enjoy watching the content that you produce.
Thank you
Awesome mill and videos.
Thanks!
your you tube channel has inspired me greatly. I have recently bought a woodland 130 mill and one of my first big projects is to mill some 150year old ponderosa pines that ate 4 foot accross the butt. thank you for your inspiration.
awesome!!
Could really use one of those meters
Hi from across the pond. I’ve been binge watching since the Saw Build and now playing catch up for the older content. Looks like you had fun at Crimson!! ATB GC
Thank you!
Love your inspiring videos!
A moisture meter could come in handy!
Nice looking unit and great to have a case to keep it & paper on it so it does not get lost
Would love to have a pin less type of moisture meter. Best of luck to everybody!
Would be a great step forward in supplying quality dry lumber
An upgrade would be nice
sure could use one!
I have a cheap pin type I use at my sawmill and could sure use something more acurate
Thanks for chance to win this superb but too expensive (for me) moisture meter… I look on it last week but price stop my passion…
johnathon@suker.org
thanks for the chance to win, keep up the great work Matt!
love the closed loop system you have
Nice job on the slabbing . GEO.
Very interesting videos. Making table tops with epoxy. Nice work. Geo.
Thanks Matt for all that you do
Nice meter..
Would be a great upgrade from my pin meter
Looks like a great tool especially for my bowl blank moisture measuring
Thanks Matt. Your inspiration is infectious.
Looks like a great tool.
Would be an upgrade from my pin meter
Would be great, specially if it is calibrated to Australian Hard wood, mainly eucalyptus.
yes, species setting would be 65
Great, We rebuilt our house a few years back and had to have a couple of trees felled. A Eucalyptus botryoides and a Eucalyptus grandis. Both slabbed and been drying under the house for almost 9 years now. Going to be dining setting and other projects.
Great tool
Awesome meter. Would be a great addition to my little shop
.
That meter would definitely be helpful! Keep up the great content!
Thanks, Matt you make woodworking fun again. Keep up the laughter and the inspiration you provide. Always great content.
Thanks Scott!
Yay, Matt Cremona
Yay, Matt
Thanks for the informative content!
Good stuff as always. I’ll be in Minneapolis in 10 days or so. Any 12/4 walnut, cherry or maple for sale?
Looks like a great tool
great video and product
Fantastic!!
Excellent work !!
Matt… I watch all your
YouTube broadcast…
Keep up the great
Work…
Thanks Steve!
Excellent work !!
Matt… I watch all your
YouTube broadcast…
Awesome!
First came across your channel when you were starting to make the bandsaw, I love that saw and totally enjoyed watching you make it. Currently in the process of build my new workshop.
Thank you!
Cool!
Looks pretty cool!
I got into woodworking so that I would have something to do when I retired, but the the cost of tools and lumber has gone up so high that it is almost impossible to afford my hobby. Thanks to the Wood Talk guys (miss them) for putting out good post and information, so I can make good choices on spending my money.
PS. Matt, where can I find a sugar momma like yours, so that I donβt have to go back to work to afford my hobby?
Always enjoy your videos
Great article about you in the local paper ! Congratulations on 5 years of hard work, a wonderful family, entertaining us, being a champion of urban wood reuse, supporting the greater woodworking community and being such a great craftsman. “Giggle on”
Thanks Chris!
To the truest Wood Whisperer, from tree to slab to Cremona creations, the most amazingly gifted wood worker I have ever encountered, thank you Matt for the opportunity. Have a great day mate, stay cool from way down under
Thanks Philip!
Just starting out in the wood working trade
Congrats on becoming a local celebrity
northwoodsdesigns@yahoo.com
I have a pin type right now and it works OK but have been looking into the pinless type with more
features.
Would love to have one of these in my garage workshop
Matt’s videos are very informative
watch all of Matt’s videos
Mattβs videos are the best
I am just starting out in woodworking, so this tool wood be a big help.
Sorry but I do not have or use social media platforms however I would like to enter for a chance to win a moisture meter.
You can never tell the moisture of wood by feeling the surface. A good meter is a must.
Love the color of the epoxy and that moisture meter looks like it does everything but the 10 day forecast. lol
david@dogradey.com.au
It sounds like a well thought-out instrument. Has to be miles better than what I currently use.
Love the slab Matt. Beautiful!
Have always enjoyed Matt’s videos. Have learned so much about sawing logs for lumber.
I have an old meter im excited to win a new one. I m trying to start a business help young people to love wood working and employ them
I love everything about these meters except the price. Not because I dont think it’s worth it but because I’m poor!
I love matts videos they are always so expiring and packed full of info
I have one of your pin type meters, itβs served me well. Would love to own one of you scanning meters that Iβve been admiring for some time. Thanks
Always enjoy Mattβs videos, I especially enjoyed the moisture meter information. Thanks
Matt is great in explaining your product.
Love Mats content especially the sawmill
I always look forward to seeing Matt’s shop updates and the products he using, it helps me make buying decisions for my shop
Great looking product. Takes moisture reading to a whole new level.
dave.wilson@me.com
Thank you, nice meter.
Matt Cremona was very good at showing the ins and outs of the moisture meter. Very good products.
bobbypach@icloud.com
Please enroll me for the moisture reader.
Thank you for the promotion.
The dp mode would be a great improvement. Hope I win.
Enjoy your projects. I made a log arch for my trailer after seeing yours and I love it!
Awesome!
I dont have a meter and need one
I’m life long woodworker, but have never used a moister meter. would like to try one.
Nice review, almost convinced me I need one. Been working wood for almost 40 years and have never used one. But like you say it sure would be handy fitting drawers the way you do.
Just starting out and would find this meter useful. Much like my stud finder, and luckily i found myself.
began stickering and drying my own wood about 10 months ago. Bought a moisture meter to check the drying progress of my slabs. Compared the reading of my slabs to some wood in the shop, and got varying readings, which I would expect.
I bought a meter in the $70 range…cannot justify the $350 for an Orion meter.
But I am glad to have one.
I really wonder about the accuracy of the different brands however. Is the ORion meter really that much better than the meter I bought?
IDK.
I have used other types of moisture meters over the years. I would like to see how Wagner’s compares
I have been woodworking for long time and have never used a moisture meter. I guess I have very blessed with my woodworking.
I was just researching meters yesterday! Thanks for the timely review.
Thanks!
Love your channel – keep up the awesome work.
Nice encapsulation! Jeez, that’s a lot of epoxy.
Great Videos Matt
Entertaining and informative.
Looks cool
Thanks for the chance to win!
I have never owned a moisture meter but enjoyed the review and put it on my list of next purchases. Also am a subscriber of Matthew Cremona weekly updates, where I saw the review of the Wagner-Orion-930 meter. Thank you
I’m a fellow Minnesotan. I love learning from your work.
Nice review of the meter
Helpful review!
I want this meter
I have an early version wagner and it works great
tool1man@yahoo.com
will these meters work on a round surface like a rough turned bowl blank?
I find Matt’s videos very informative and especially interesting to watch.
Love what you r’e doing ….are you planning anything in Vegas with April?
Just hanging out at the Triton booth
Love the tutorial on products. You do a great job! Informative without selling.
Thanks Fred!
Will be nice to have
Hope I Win
Since I saw the first video that I have followed for some time, thank you for sharing your knowledge, I like to see when you saw the slabs very beautiful pieces.
Thanks Jorge!
Thx
Great show
Using a pin style now, would be great to upgrade.
2368 RIDGEWOOD AVE
Always wanted one of these but could never justify the cost
Nice video and nice looking meter.
I doesn’t known Orian before this video, but it’s seam to be the best moisture meter I ever seen
Thanks for all your time and valuable information. Would still like to understand how you determined how much epoxy you needed for that encap project!
I have the same pin style meter Matt showed in this video, its hard to get accurate readings. I would love to move up to a Orion 930 and “ditch the pins” once and for all!
1008 5TH AVE SW
Love your channel! Watch you all the time!
L
Time for a meter upgrade! π
Enjoy some Wagner products and trust them always.
gandalfc@mac.com
I have a cheap moisture meter but i don’t think it is very good. I would love the new wagner 930 as i’ve seen a few guys on you tube and they rate it very highly
Love your work
Literally just did some small slabbing for the first time. This thing would come in handy when the time comes to use the stock.
These new meters are awesome. So is your work and ability to teach it
Western Oklahoma seems to be a bad place to try slabbing. Can’t find many big trees.
Your Product looks great and will help in my shop
Can’t wait to see the finished table.
Pick me. Pick me. Pick me. Pick me.
Love the channel. have learned so much watching. thanks always. Cant wait to win.
Love the teaching and sharing you do!
Nice to see someone like Wagner team up with Matt Cremona
Thanks.
5022 Brookdale Road East
Matt Cremona is one of my most followed content makers in YouTube.
Great looking work you do matt, keep up the neat projects.
It wold be cool to win
This will be the first time Iβve won one of these things, canβt wait. Thanks Matt
Awesome
Love the content Matt. Wife and I stumbled across your channel after we were gifted the use of a Wood-Mizer a month ago and now we watch your channel together and really appreciate how you do what you do π
Thanks William!
If it’s good enough for Matt…
Thank you for all you do for the woodworking community! It is very much appreciated!
Love your videos, very informative and entertaining!
Hope this’ll be my first moisture meter…thanks Matt, for always being inspiring in woodworking
Interesting. My meter die in a fall. So, I will consider one of those.
Love your channel keep up the good work!
Thanks for your continuing with your enthusiasm and great videos.
Great information and presentation style. Moisture meter is on my wishlist.
Awesome as always
Thanks for the contest ! I can’t wait to build a saw mill and start milling my own lumber !
Thanks for the chance to win a meter. As a life long wood worker and builder I know how important the moisture content can affect the out come of a project.
Looks like a great product. This would be my first moisture meter. It would be a huge help in taking my woodworking to a new level making it easier to account for wood movement.
Perfect!
Matt, love you videos great job. Hope to have this for my first meter
I thought the comment was going to the Wagner people. Addressing your youtube channel, the thing I most enjoy is your easy personality β such a nice combination of a relaxed and engaging approach with a huge work ethic.
Lovely slab work, will enjoy seeing the final piece.
Always enjoy your work and enthusiasm. Thanks Matt
You folks ahve some fine products. And I am not happy to keep pushing pins into nice wood to determine its moisture level.
Loved your video. Still excited about getting heavily involved into the carpentry world. Thank you for all of your content and hopefully ill get stationed some place close to try and come out your way for a tour.
Great project. Thanks.
Love your content. I would love to have a moisture meter for the slabs I started to mill with my new mill.
Hope I win!
Wow, everybody wants to win. Well, coooouunt me in!
Love your videos. I always like to watch your sawmill doing it’s thing. If I was younger I would buy your plans for sure.
I’m very interested in your product.
Iβve been looking for a moisture meter, I could use this one.
Way better way to check moisture than the old pin-type unit I have been using – thanks for the demo Matt.
Thank you for the content.
Incredible work I am gearing up to saw slabs when I retire
I have been milling wood, and i was just thinking about a moisture meter!
From winnipeg
The encapsulation came out great!!
Nice demo of the moisture meter. I could really use one without pins.
Enjoy watching all your videos and that pour came out great!
Looks like a pretty good meter
todd@an-mccmil.com
Great work Matt, I could use a new moisture meter
Looking to start milling for guitar builds. Would love this meter
Looks like a very solid unit. Would love to try one out.
Thanks Matt! Keep up the good work.
Love the look of the pour!
Thanks Rick!
A moisture meter is an essential tool for woodwork here in Australia
A moisture meter is an essential tool for woodwork
Love your videos , especially when you use your sawmill!
I love this project just awesome
I’m just starting to get back into woodworking (it’s been 30 plus years) and it would be great to win this meter.
Enjoy your content
These meters are way better than mine.
Great presentation of a great product line
Love your videos!! It gives me a lot of insight on sawing!! Thanks Matt!!
That moisture meter looks Awsome
Love what you do with wood.
Always love to see the bandsaw mill in action!
kjvm@bellsouth.net
Enjoy your videos so very much. Wish that I could do some of the projects that you are so successful doing.
When you peeled the encapsulated slab off of the tape, I was really surprised at the color. It might be interesting (on a smaller table) to have a gap in the table top for inserting colored sheets to change the tint of the table?
I’ve been out of saw milling for quite some time no time driving a big rig. getting back into saw milling starting all over from scratch.
I was very impressed with the Wagner meter demo I saw on Matt Cremona’s channel.
4956 old federal rd n.
Apt f
Chatsworth ga. 30705
I’ve been out of saw milling for quite some time no time driving a big rig. getting back into saw milling starting all over from scratch.
Looks like a handy tool to have.
Moisture meter is a useful tool
Moisture meter is must have if you work with tough cut lumber.
470 E. Bannerstone Ct
tmccain4@comcast.net
Not sure but a moisture meter of this stature is cool as hell
Love the encapsulated slab.
Moisture meter is handy to have around the shop.
Thanks for the opportunity.
I really enjoy your videos !
I been looking for a quality moisture meter and saw Matt Cremona’s review of your meters and liked his presentation! I believe your product is excellent!
The moisture meter looks like it could be a game changer in making sure the wood you are about to use on a project is in fact at a moisture level to use.
Needing a more accurate moisture meter
Love your videos, and the saw mill. Also love how you load the mill, Awesome.
I look forward to all of your videos, you have a great sense of humor and are easy to follow.
Great video’s, I always seem to learn something new. Thanks
Thanks for the great review of the Wagner moisture meters
Nice meters, always wanted to have one of those.
I’m building a bandsaw right now that meter would really come in handy I’m going to be cutting red oak and pecan and two slabs
Great videos and even better content
Great channel.
Want to get into milling slabs. A meter would really be nice.
started working with air dried lumber, need to know moisture before milling for projects.
Great video
Live in England, certainly could use such a fine meter without having to pin.
Learn something new from every video.
Too much wood, need better meter
I did all of the things and got no entries what gives ?
thanks
About ready to cut some small logs into boards to see how the spalting looks
Keep up the good work
thanks for the add
Awesome channel. Luv your saw mill.
I love your videos!! Can’t wait to see that epoxy inlay table when it’s finished.
Wagner moisture meters are top of the line!
Thanks for having this giveaway. It would really help checking the moisture of the burls that I am drying.
I live in central Florida and own a sawmill (Timber King 1600)
960 S ROOSEVELT AVE
Charles
Just started milling up some smaller logs so this would be nice to have
Love the videos and this wood be a great tool for my wood working and saw mill cuts
I really enjoy your ‘down to earth’ approach to your videos and work. Also, your sawmill is AWESOME!
Never missed one of your videos since I found you on here a few years ago
Thanks Jim!
Cool!
Your videos are very helpful and interesting, especially how you make your choice for cutting a log.
wweyand@mac.com
Thank you for a chance to win an Orion meter. Glad Orion chose you to sponsor.
Nice review of the product.
Pretty much anything Matt Cremona demos or recommends is going to be worthwhile having or at the very least paying attention to
Whoohoo! I need!
Great meter
See you at the wood show in Vegas next week
13970 Hillcrest drive
Hi Matt thanks for your YouTube channel it makes me want to build a sawmill
Kinda hard to get pins 4 inches into the slab I’ve got drying on the porch π
jmiller854@comcast.net
[…] Enter to win an Orion 930 Moisture Meter https://www.mattcremona.com/blog/giveaways/wagner-orion-930-moisture-meter-giveaway […]